Hydro jetting uses streams at 3,500 to 5,000 psi to scour pipe walls in homes built before 1960 in the Old North End and Hill Section. Clay and cast-iron lines common there collect decades of scale and root intrusion from maples along Battery Park and the Waterfront. Operators insert a 3/8-inch hose with a forward and reverse jet head, advancing from cleanouts at the foundation to the street lateral while monitoring camera footage to avoid cracking aged joints.
Winter freezes in Chittenden County push water back through vent stacks when lines are partially blocked, creating ice dams that ordinary snaking cannot break. Jetting performed after the first hard freeze in neighborhoods like the New North End and Riverside removes the compacted debris before it expands and splits pipes under driveways and sidewalks. Technicians schedule these jobs when daytime temperatures stay above 25 degrees to keep water from refreezing inside the line during the flush.
South Burlington and Winooski customers with 1970s ranch homes often see grease mats from restaurants near Church Street Marketplace travel downstream into residential laterals. A single pass with a 15-degree rotating nozzle at 4,000 psi strips the coating without chemicals that could affect Lake Champlain. Post-jet camera inspection confirms the line is clear to the main before the crew leaves the property.
Terrain around Ethan Allen Homestead and the Burlington Bike Path creates low spots where sediment settles after heavy spring rains. Jetting crews start at the lowest cleanout and work uphill, flushing debris toward the street connection rather than back into the house. This sequence prevents secondary backups in basements common on the Lakeside slope.
Technician insight
In Burlington the thing that catches most people out with hydro jetting is the old clay laterals under the South End sidewalks; once roots get through the joints the jet can push debris into the city main and create a backup two houses down if you don't camera the whole run first.
South End main line backup after heavy rain
A homeowner on a side street off Pine noticed slow drains after a warm March thaw. Camera showed roots and sediment 40 feet from the cleanout. Jetting cleared the line to the street connection in one pass and restored full flow without excavation.
Hydro Jetting Services We Offer
✓Main Sewer Line Jetting
Clears roots and sludge from the 4-inch or 6-inch line running from foundation cleanout to the street in older Burlington blocks.
✓Kitchen Grease Jetting
Removes hardened cooking fats that build up in lines serving homes near Downtown restaurants and the Flynn Center.
✓Root Intrusion Jetting
Cuts through tree roots that enter clay pipes under lawns in the South End and Hill Section without excavation.
✓Storm Drain Jetting
Flushes sediment and leaves from yard drains and catch basins along the Burlington Bike Path corridor after spring runoff.
✓Bathroom Line Jetting
Restores flow in 2-inch and 3-inch waste lines clogged by hair and soap scum in multi-unit buildings in the Old North End.
Hydro Jetting Cost in Vermont
| Service | Typical Range | What Affects It |
|---|---|---|
| Standard residential main line jetting | $350–$550 | Single cleanout access, no major roots |
| Root-heavy jetting | $550–$850 | Multiple passes or two cleanouts required |
| Commercial kitchen line | $450–$700 | Grease load and longer run to street |
| Storm drain or catch basin | $300–$500 | Surface access, seasonal debris |
Ranges are typical for Vermont and confirmed with an exact written quote before any work starts.
How it works
- 1
Camera Inspection
Technician locates the cleanout and runs a camera to map the clog location and pipe condition before jetting begins.
- 2
Hose Insertion
High-pressure hose with specialized nozzle is fed into the line starting at the lowest accessible point.
- 3
Jetting Pass
Water pressure scours walls while the operator advances and retracts the hose to break up roots, grease and scale.
- 4
Final Flush and Check
Line is flushed with clean water and re-inspected to confirm full flow to the main before equipment is removed.
Pricing
Most hydro jetting jobs in Burlington fall between $350 and $850 depending on access and clog severity.